EnDTaS Coupons, Discount Code September 2021

Pick up all available EnDTaS coupon codes, promo codes & discount in order to save the most money on your software purchase.

20% OFF 2CV Bodyshell plywood laser cut CAM files
20% OFF 2CV Bodyshell plywood laser cut CAM files
CODEOngoing

Just quote this 2CV Bodyshell plywood laser cut CAM files coupon code during checkout and avail 20% OFF at EnDTaS. Go for it!

100% Success
0 Used
Share
20% OFF Chassis + Escort Body
20% OFF Chassis + Escort Body
CODEOngoing

Prompt to use this Chassis + Escort Body discount code at the basket to get 20% OFF at EnDTaS. Purchase now!

100% Success
0 Used
Share
20% OFF Chassis + Mini Moke Body
20% OFF Chassis + Mini Moke Body
CODEOngoing

Grab this Chassis + Mini Moke Body discount code and enjoy 20% OFF at EnDTaS. Go for it!

100% Success
0 Used
Share
20% OFF Escort MK2 tot rod car bodyshell CAM files
20% OFF Escort MK2 tot rod car bodyshell CAM files
CODEOngoing

Use this Escort MK2 tot rod car bodyshell CAM files discount code during checkout and take 20% OFF at EnDTaS. Enjoy it!

100% Success
0 Used
Share
20% OFF Land Rover tot rod car bodyshell CAM files
20% OFF Land Rover tot rod car bodyshell CAM files
CODEOngoing

Check out this Land Rover tot rod car bodyshell CAM files coupon code and receive 20% OFF at EnDTaS. Purchase now!

100% Success
0 Used
Share
20% OFF Mini moke tot rod car bodyshell CAM files
20% OFF Mini moke tot rod car bodyshell CAM files
CODEOngoing

Just quote this Mini moke tot rod car bodyshell CAM files coupon code during checkout and avail 20% OFF at EnDTaS. Go for it!

100% Success
0 Used
Share
20% OFF
20% OFF Tot Rod Chassis + Citroen 2CV Bodyshell
CODEOngoing

Receive 20% OFF at EnDTaS via this Tot Rod Chassis + Citroen 2CV Bodyshell discount code. Don't miss out!

100% Success
0 Used
Share
20% OFF Tot Rod Chassis + Land Rover CAM files Bundle
20% OFF Tot Rod Chassis + Land Rover CAM files Bundle
CODEOngoing

Use this Tot Rod Chassis + Land Rover CAM files Bundle discount code during checkout and take 20% OFF at EnDTaS. Enjoy it!

100% Success
0 Used
Share
20% OFF Tot Rod Chassis CAM Files
20% OFF Tot Rod Chassis CAM Files
CODEOngoing

Simply take 20% OFF at EnDTaS by using this Tot Rod Chassis CAM Files coupon code. Don't miss out!

100% Success
0 Used
Share

Software Description

2CV Bodyshell plywood laser cut CAM files

Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress one and half standart 1220x2440mm plywood sheet.

Assembly is done by using bolts and nuts. All slots and holes are present at the model files. No major shaping should be necessary after laser cutting.

This car body perfectly fits to my other product: tot rod mini car chassis.. sizes and bolt holes etc. match. Please look for it in my other designs.

Caution this purchase doesn't include the chasis files. This is the purchase for the car bodyshell only. Car chassis files should be purchased separately.

CAM files are downloadable in 15 different formats 

Chassis + Escort Body

chassis CAM files info

CAM files and plans for a 1.4m long mini car chassis.

Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress less than one standart 1220x2440mm plywood sheet (approx 2/3 as shown in pics).

Assembly is done by using bolts and nuts only. All slots and holes are present at the model files. No cutting or shaping should be necessary after laser cutting.

Any model car-body can be placed on top or the mini vehicle can be driven as a chassis. Multiple holes are provided on the chassis for body assembly.

Can be powered by kids car dc motors with reduction gear. Their web pages, details and 3d models are also provided.

Wheels are standard small utility cart wheels. Wheel to motor adapters of two commonly found wheels are also included among the files suitable for 3d printing.

12mm steel pipes can be used as the steering rod and the rear axle. Adapter parts for enlarging the rear axle from 12 to 20mm for the wheel is also included.

Front steering can be done by using 3d printed parts or stacked&glued or screwed plywood parts. All necessary CAM files are included.

 

escort body CAM files info

 

CAM files and plans for the Escort MK2 tot rod mini car body.

Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 6-10 mm thick plywood. Requiress less than one standart 1220x2440mm plywood sheet.

Assembly is done by using bolts and nuts only. All slots and holes are present at the model files. No cutting or shaping should be necessary after laser cutting.

This car body perfectly fits to my other product: tot rod mini car chassis.. sizes and bolt holes etc. match. Please look for it in my other designs.

Caution this purchase doesn't include the chasis files. This is the purchase for Minimoke car body only. Car chassis files should be purchased separately.

2 headlight and 4 headlight grille versions are available.

CAM files are downloadable in 12 different formats which are shown at the last picture.

Chassis + Mini Moke Body

Chassis info

CAM files and plans for a 1.4m long mini car chassis.

Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress less than one standart 1220x2440mm plywood sheet (approx 2/3 as shown in pics).

Assembly is done by using bolts and nuts only. All slots and holes are present at the model files. No cutting or shaping should be necessary after laser cutting.

Any model car-body can be placed on top or the mini vehicle can be driven as a chassis. Multiple holes are provided on the chassis for body assembly.

Can be powered by kids car dc motors with reduction gear. Their web pages, details and 3d models are also provided.

Wheels are standard small utility cart wheels. Wheel to motor adapters of two commonly found wheels are also included among the files suitable for 3d printing.

12mm steel pipes can be used as the steering rod and the rear axle. Adapter parts for enlarging the rear axle from 12 to 20mm for the wheel is also included.

Front steering can be done by using 3d printed parts or stacked&glued or screwed plywood parts. All necessary CAM files are included.

 

Mini Moke CAM files info

CAM files and plans for the Minimoke tot rod kids car body.

Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress less than one standart 1220x2440mm plywood sheet (approx 2/3 as shown in pics).

Assembly is done by using bolts and nuts only. All slots and holes are present at the model files. No cutting or shaping should be necessary after laser cutting.

This car body perfectly fits to my other product: tot rod mini car chassis.. sizes and bolt holes etc. match. Please look for it in my other designs.

Caution this purchase doesn't include the chasis files. This is the purchase for Minimoke car body only. Car chassis files should be purchased separately.

CAM files are downloadable in 12 different formats which are shown at the last picture.

Escort MK2 tot rod car bodyshell CAM files

Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 6-10 mm thick plywood. Requiress less than one standart 1220x2440mm plywood sheet.

Assembly is done by using bolts and nuts only. All slots and holes are present at the model files. No cutting or shaping should be necessary after laser cutting.

This car body perfectly fits to my other product: tot rod mini car chassis.. sizes and bolt holes etc. match. Please look for it in my other designs.

Caution this purchase doesn't include the chasis files. This is the purchase for Minimoke car body only. Car chassis files should be purchased separately.

2 headlight and 4 headlight grille versions are available.

CAM files are downloadable in 12 different formats which are shown at the last picture.

Land Rover tot rod car bodyshell CAM files

Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 10mm thick plywood. Requiress two standart 1220x2440mm plywood sheets.

Earlier version Land rover as well as later Defender series can be made by using the parts. More than one copy of some of the parts are inserted into the empty spaces of the plywood sheets in case they are needed or they can be used to build customized versions of the vehicle. See the pictures for different versions.

Assembly is done by using bolts and nuts only. All slots and holes are present at the model files. No cutting or shaping should be necessary after laser cutting.

This vehicle body perfectly fits to my other product: tot rod mini car chassis.. sizes and bolt holes etc. match. Please look for it in my other designs.

Caution this purchase doesn't include the chasis files. This is the purchase for Land Rover car body only. Car chassis files should be purchased separately.

CAM files are downloadable in 10 different formats which are shown at the last picture.

Mud guard can be built in both laser cut plywood and also by using a 3d printer. STL files for 3d printing are supplied.

Mini moke tot rod car bodyshell CAM files

CAM files and plans for the Minimoke tot rod kids car body.

Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress less than one standart 1220x2440mm plywood sheet (approx 2/3 as shown in pics).

Assembly is done by using bolts and nuts only. All slots and holes are present at the model files. No cutting or shaping should be necessary after laser cutting.

This car body perfectly fits to my other product: tot rod mini car chassis.. sizes and bolt holes etc. match. Please look for it in my other designs.

Caution this purchase doesn't include the chasis files. This is the purchase for Minimoke car body only. Car chassis files should be purchased separately.

CAM files are downloadable in 12 different formats which are shown at the last picture.

Tot Rod Chassis + Land Rover CAM files Bundle

Chassis info

CAM files and plans for a 1.4m long mini car chassis.

Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress less than one standart 1220x2440mm plywood sheet (approx 2/3 as shown in pics).

Assembly is done by using bolts and nuts only. All slots and holes are present at the model files. No cutting or shaping should be necessary after laser cutting.

Any model car-body can be placed on top or the mini vehicle can be driven as a chassis. Multiple holes are provided on the chassis for body assembly.

Can be powered by kids car dc motors with reduction gear. Their web pages, details and 3d models are also provided.

Wheels are standard small utility cart wheels. Wheel to motor adapters of two commonly found wheels are also included among the files suitable for 3d printing.

12mm steel pipes can be used as the steering rod and the rear axle. Adapter parts for enlarging the rear axle from 12 to 20mm for the wheel is also included.

Front steering can be done by using 3d printed parts or stacked&glued or screwed plywood parts. All necessary CAM files are included.

Landrover body info

 

CAM files for the Land Rover tot rod kids car body.

Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 10mm thick plywood. Requiress two standart 1220x2440mm plywood sheets.

Earlier version Land rover as well as later Defender series can be made by using the parts. More than one copy of some of the parts are inserted into the empty spaces of the plywood sheets in case they are needed or they can be used to build customized versions of the vehicle. See the pictures for different versions.

Assembly is done by using bolts and nuts only. All slots and holes are present at the model files. No cutting or shaping should be necessary after laser cutting.

This vehicle body perfectly fits to my other product: tot rod mini car chassis.. sizes and bolt holes etc. match. Please look for it in my other designs.

Caution this purchase doesn't include the chasis files. This is the purchase for Land Rover car body only. Car chassis files should be purchased separately.

CAM files are downloadable in 10 different formats which are shown at the last picture.

Mud guard can be built in both laser cut plywood and also by using a 3d printer. STL files for 3d printing are supplied.

Tot Rod Chassis CAM Files

CAM files and plans for a 1.4m long mini car chassis.

Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress less than one standart 1220x2440mm plywood sheet 

Assembly is done by using bolts and nuts only. All slots and holes are present at the model files. No cutting or shaping should be necessary after laser cutting.

Any model car-body can be placed on top or the mini vehicle can be driven as a chassis. Multiple holes are provided on the chassis for body assembly.

Can be powered by kids car dc motors with reduction gear. 

Wheels are standard small utility cart wheels. Wheel to motor adapters of two commonly found wheels are also included among the files suitable for 3d printing.

12mm steel pipes can be used as the steering rod and the rear axle. Adapter parts for enlarging the rear axle from 12 to 20mm for the wheel is also included.

Front steering can be done by using 3d printed parts or stacked&glued or screwed plywood parts. All necessary CAM files are included.